| Product No | Primary nominal RMS current(A) | Measuring range(A) | Supply voltage (V) | Secondary output | Accuracy(%) | Output bandwidth | Operating Temp.(°C) | Copper busbar(mm) | PCB | Others |
|---|---|---|---|---|---|---|---|---|---|---|
| CR1V 6 PB00 | 6 | ±18 | 5 | 2.5±1.875V | ±0.7 | 100 | -40~85 | NA | + | |
 CR1V 6 PB00<ul><li>Closed loop（compensated）current sensor using the Hall effect</li><li>Galvanic separation between primary and secondary</li><li>Insulating plastic case recognized according to UL 94-V0</li><li>Very good linearity</li><li>High accuracy</li><li>Very low offset drift over temperature</li><li>No insertion losses</li><li>Standards:IEC 60664-1: 2020, IEC 61800-5-1: 2022, IEC 62109-1: 2010</li></ul> more... |
||||||||||
| CR1V 6 PB01 | 6 | ±18 | 5 | 2.5±1.875V | ±0.7 | 200 | -40~85 | NA | + | |
 CR1V 6 PB01<ul><li>Closed loop（compensated）current sensor using the Hall effect</li><li>Galvanic separation between primary and secondary</li><li>Insulating plastic case recognized according to UL 94-V0</li><li>Very good linearity</li><li>High accuracy</li><li>Very low offset drift over temperature</li><li>No insertion losses</li><li>Standards:IEC 60664-1: 2020, IEC 61800-5-1: 2022, IEC 62109-1: 2010</li></ul> more... |
||||||||||
| CR1V 15 PB00 | 15 | ±45 | 5 | 2.5±1.875V | ±0.7 | 100 | -40~85 | NA | + | |
 CR1V 15 PB00<ul><li>Closed loop（compensated）current sensor using the Hall effect</li><li>Galvanic separation between primary and secondary</li><li>Insulating plastic case recognized according to UL 94-V0</li><li>Very good linearity</li><li>High accuracy</li><li>Very low offset drift over temperature</li><li>No insertion losses</li><li>Standards:IEC 60664-1: 2020, IEC 61800-5-1: 2022, IEC 62109-1: 2010</li></ul> more... |
||||||||||
| CR1V 15 PB01 | 15 | ±45 | 5 | 2.5±1.875V | ±0.7 | 200 | -40~85 | NA | + | |
 CR1V 15 PB01<ul><li>Closed loop（compensated）current sensor using the Hall effect</li><li>Galvanic separation between primary and secondary</li><li>Insulating plastic case recognized according to UL 94-V0</li><li>Very good linearity</li><li>High accuracy</li><li>Very low offset drift over temperature</li><li>No insertion losses</li><li>Standards:IEC 60664-1: 2020, IEC 61800-5-1: 2022, IEC 62109-1: 2010</li></ul> more... |
||||||||||
| CN1A 25 PB00 | 25 | ±36 | ±15 | ±25mA | ±0.5 | 150 | -40~85 | NA | + | |
 CN1A 25 PB00<ul><li>Closed loop (compensated) current sensor using the Hall Effect</li><li>Galvanic separation between primary and secondary</li><li>Insulating plastic case recognized according to UL94-V0</li><li>Very good linearity</li><li>High accuracy</li><li>Very low offset drift over temperature</li><li>No insertion loss</li><li>Standards:IEC 60664-1:2020, IEC 61800-5-1:2022, IEC 62109-1:2010</li></ul> more... |
||||||||||
| CR1V 25 PB00 | 25 | ±75 | 5 | 2.5±1.875V | ±0.7 | 100 | -40~85 | NA | + | |
 CR1V 25 PB00<ul><li>Closed loop（compensated）current sensor using the Hall effect</li><li>Galvanic separation between primary and secondary</li><li>Insulating plastic case recognized according to UL 94-V0</li><li>Very good linearity</li><li>High accuracy</li><li>Very low offset drift over temperature</li><li>No insertion losses</li><li>Standards:IEC 60664-1: 2020, IEC 61800-5-1: 2022, IEC 62109-1: 2010</li></ul> more... |
||||||||||
| CR1V 25 PB01 | 25 | ±75 | 5 | 2.5±1.875V | ±0.7 | 200 | -40~85 | NA | + | |
 CR1V 25 PB01<ul><li>Closed loop（compensated）current sensor using the Hall effect</li><li>Galvanic separation between primary and secondary</li><li>Insulating plastic case recognized according to UL 94-V0</li><li>Very good linearity</li><li>High accuracy</li><li>Very low offset drift over temperature</li><li>No insertion losses</li><li>Standards:IEC 60664-1: 2020, IEC 61800-5-1: 2022, IEC 62109-1: 2010</li></ul> more... |
||||||||||
| CN2A 40 PB01 | 40 | ±110 | ±12...15 | ±20mA | ±0.5 | 200 | -40~85 | NA | + | |
 CN2A 40 PB01<ul><li>Closed loop (compensated) current sensor using the Hall Effect</li><li>Galvanic separation between primary and secondary</li><li>Insulating plastic case recognized according to UL94-V0</li><li>Very good linearity</li><li>High accuracy</li><li>Very low offset drift over temperature</li><li>No insertion loss</li><li>Standards:</li><li>IEC 60664-1:2020 IEC 61800-5-1:2022 IEC 62109-1:2010</li></ul> more... |
||||||||||
| CS3A 50 P01 | 50 | ±90 | ±12...15 | ±50mA | ±0.3 | 150 | -40~85 | 13.5 x 10 mm | + | |
 CS3A 50 P01<ul><li>Closed loop (compensated) current sensor using the Hall Effect</li><li>Galvanic separation between primary and secondary</li><li>Insulating plastic case recognized according to UL 94-V0</li><li>Very good linearity</li><li>High accuracy</li><li>Very low offset drift over temperature</li><li>No insertion loss</li><li>Standards:IEC 60664-1:2020, IEC 61800-5-1:2022, IEC 62109-1:2010</li></ul> more... |
||||||||||
| CS3A 50 P51 | 50 | ±90 | ±12...15 | ±50mA | ±0.3 | 150 | -20~75 | 13.5 x 10 mm | + | |
 CS3A 50 P51<ul><li>Closed loop (compensated) current sensor using the Hall Effect</li><li>Galvanic separation between primary and secondary</li><li>Insulating plastic case recognized according to UL 94-V0</li><li>Very good linearity</li><li>High accuracy</li><li>Very low offset drift over temperature</li><li>No insertion loss</li><li>Standards:IEC 60664-1:2020, IEC 61800-5-1:2022, IEC 62109-1:2010</li></ul> more... |
||||||||||
| CN2A 50 PB01 | 50 | ±110 | ±12...15 | ±25mA | ±0.5 | 200 | -40~85 | NA | + | |
 CN2A 50 PB01<ul><li>Closed loop (compensated) current sensor using the Hall Effect</li><li>Galvanic separation between primary and secondary</li><li>Insulating plastic case recognized according to UL 94-V0</li><li>Very good linearity</li><li>High accuracy</li><li>Very low offset drift over temperature</li><li>No insertion loss</li><li>Standards:IEC 60664-1:2020, IEC 61800-5-1:2022, IEC 62109-1:2010</li></ul> more... |
||||||||||
| CN2A 80 PB01 | 80 | ±160 | ±12...15 | ±40mA | ±0.5 | 200 | -40~85 | NA | + | |
 CN2A 80 PB01<ul><li>Closed loop (compensated) current sensor using the Hall Effect</li><li>Galvanic separation between primary and secondary</li><li>Insulating plastic case recognized according to UL 94-V0</li><li>Very good linearity</li><li>High accuracy</li><li>Very low offset drift over temperature</li><li>No insertion loss</li><li>Standards:IEC 60664-1:2020, IEC 61800-5-1:2022, IEC 62109-1:2010</li></ul> more... |
||||||||||
| CN2A 100 PB01 | 100 | ±160 | ±12...15 | ±50mA | ±0.5 | 200 | -40~85 | NA | + | |
 CN2A 100 PB01<ul><li>Closed loop (compensated) current sensor using the Hall Effect</li><li>Galvanic separation between primary and secondary</li><li>Insulating plastic case recognized according to UL 94-V0</li><li>Very good linearity</li><li>High accuracy</li><li>Very low offset drift over temperature</li><li>No insertion loss</li><li>Standards:IEC 60664-1:2020, IEC 61800-5-1:2022, IEC 62109-1:2010</li></ul> more... |
||||||||||
| CR1A 100 H00 | 100 | ±200 | ±12...15 | ±50mA | ±0.5 | 200 | -40~85 | Ø20.2 | ||
 CR1A 100 H00<ul><li>Closed loop（compensated）current sensor using the Hall effect</li><li>Galvanic separation between primary and secondary</li><li>Insulating plastic case recognized according to UL 94-V0</li><li>Very good linearity</li><li>High accuracy</li><li>Very low offset drift over temperature</li><li>No insertion losses</li><li>Standards:IEC 60664-1: 2020, IEC 61800-5-1: 2022, IEC 62109-1: 2010</li></ul> more... |
||||||||||
| CR1A 100 H01 | 100 | ±200 | ±12...15 | ±50mA | ±0.5 | 200 | -40~85 | Ø20.2 | ||
 CR1A 100 H01<ul><li>Closed loop（compensated）current sensor using the Hall effect</li><li>Galvanic separation between primary and secondary</li><li>Insulating plastic case recognized according to UL 94-V0</li><li>Very good linearity</li><li>High accuracy</li><li>Very low offset drift over temperature</li><li>No insertion losses</li><li>Standards:IEC 60664-1: 2020, IEC 61800-5-1: 2022, IEC 62109-1: 2010</li></ul> more... |
||||||||||
| CS3A 100 P00 | 100 | ±150 | ±12...15 | ±100mA | ±0.3 | 150 | -40~85 | 13.5 x 10 mm | + | |
 CS3A 100 P00<ul><li>Closed loop (compensated) current sensor using the Hall Effect</li><li>Galvanic separation between primary and secondary</li><li>Insulating plastic case recognized according to UL 94-V0</li><li>Very good linearity</li><li>High accuracy</li><li>Very low offset drift over temperature</li><li>No insertion loss</li><li>Standards:IEC 60664-1:2020, IEC 61800-5-1:2022, IEC 62109-1:2010</li></ul> more... |
||||||||||
| CS3A 100 P01 | 100 | ±150 | ±12...15 | ±50mA | ±0.3 | 150 | -40~85 | 13.5 x 10 mm | + | |
 CS3A 100 P01<ul><li>Closed loop (compensated) current sensor using the Hall Effect</li><li>Galvanic separation between primary and secondary</li><li>Insulating plastic case recognized according to UL 94-V0</li><li>Very good linearity</li><li>High accuracy</li><li>Very low offset drift over temperature</li><li>No insertion loss</li><li>Standards:IEC 60664-1:2020, IEC 61800-5-1:2022, IEC 62109-1:2010</li></ul> more... |
||||||||||
| CS3A 125 P00 | 125 | ±200 | ±12...15 | ±100mA | ±0.3 | 150 | -40~85 | 13.5 x 10 mm | + | |
 CS3A 125 P00<ul><li>Closed loop (compensated) current sensor using the Hall Effect</li><li>Galvanic separation between primary and secondary</li><li>Insulating plastic case recognized according to UL 94-V0</li><li>Very good linearity</li><li>High accuracy</li><li>Very low offset drift over temperature</li><li>No insertion loss</li><li>Standards:IEC 60664-1:2020, IEC 61800-5-1:2022, IEC 62109-1:2010</li></ul> more... |
||||||||||
| CR1A 200 H00 | 200 | ±400 | ±12...15 | ±50mA | ±0.5 | 150 | -40~85 | Ø20.2 | ||
 CR1A 200 H00<ul><li>Closed loop (compensated) current sensor using the Hall Effect</li><li>Galvanic separation between primary and secondary</li><li>Insulating plastic case recognized according to UL 94-V0</li><li>Very good linearity</li><li>High accuracy</li><li>Very low offset drift over temperature</li><li>No insertion loss</li><li>Standards:IEC 60664-1:2020, IEC 61800-5-1:2022, IEC 62109-1:2010</li></ul> more... |
||||||||||
| CR1A 200 H01 | 200 | ±400 | ±12...15 | ±50mA | ±0.5 | 150 | -40~85 | Ø20.2 | ||
 CR1A 200 H01<ul><li>Closed loop (compensated) current sensor using the Hall Effect</li><li>Galvanic separation between primary and secondary</li><li>Insulating plastic case recognized according to UL 94-V0</li><li>Very good linearity</li><li>High accuracy</li><li>Very low offset drift over temperature</li><li>No insertion loss</li><li>Standards:IEC 60664-1:2020, IEC 61800-5-1:2022, IEC 62109-1:2010</li></ul> more... |
||||||||||
| CM1A 200 H00 | 200 | ±420 | ±12...15 | ±100mA | ±0.2 | 100 | -40~85 | Ø15.6 | ||
 CM1A 200 H00<ul><li>Closed loop (compensated) current sensor using the Hall Effect</li><li>Galvanic separation between primary and secondary</li><li>Insulating plastic case recognized according to UL 94-V0</li><li>Very good linearity</li><li>High accuracy</li><li>Very low offset drift over temperature</li><li>No insertion loss</li><li>Standards:IEC 60664-1:2020, IEC 61800-5-1:2022, IEC 62109-1:2010</li></ul> more... |
||||||||||
| CR1A 300 H00 | 300 | ±500 | ±12...15 | ±50mA | ±0.5 | 200 | -40~85 | Ø20.2 | ||
 CR1A 300 H00<ul><li>Closed loop (compensated) current sensor using the Hall Effect</li><li>Galvanic separation between primary and secondary</li><li>Insulating plastic case recognized according to UL 94-V0</li><li>Very good linearity</li><li>High accuracy</li><li>Very low offset drift over temperature</li><li>No insertion loss</li><li>Standards:IEC 60664-1:2020, IEC 61800-5-1:2022, IEC 62109-1:2010</li></ul> more... |
||||||||||
| CR1A 300 H01 | 300 | ±500 | ±12...15 | ±50mA | ±0.5 | 200 | -40~85 | Ø20.2 | ||
 CR1A 300 H01<ul><li>Closed loop (compensated) current sensor using the Hall Effect</li><li>Galvanic separation between primary and secondary</li><li>Insulating plastic case recognized according to UL 94-V0</li><li>Very good linearity</li><li>High accuracy</li><li>Very low offset drift over temperature</li><li>No insertion loss</li><li>Standards:IEC 60664-1:2020, IEC 61800-5-1:2022, IEC 62109-1:2010</li></ul> more... |
||||||||||
| CR1A 300 H02 | 300 | ±500 | ±12...15 | ±50mA | ±0.5 | 200 | -40~85 | Ø20.2 | ||
 CR1A 300 H02<ul><li>Closed loop (compensated) current sensor using the Hall Effect</li><li>Galvanic separation between primary and secondary</li><li>Insulating plastic case recognized according to UL 94-V0</li><li>Very good linearity</li><li>High accuracy</li><li>Very low offset drift over temperature</li><li>No insertion loss</li><li>Standards:IEC 60664-1:2020, IEC 61800-5-1:2022, IEC 62109-1:2010</li></ul> more... |
||||||||||
| CM2A 300 H00 | 300 | ±500 | ±12...20 | ±150mA | ±0.3 | 100 | -40~85 | Ø20 | ||
 CM2A 300 H00<ul><li>Closed loop（compensated）current sensor using the Hall effect</li><li>Galvanic separation between primary and secondary</li><li>Insulating plastic case recognized according to UL 94-V0</li><li>Very good linearity</li><li>High accuracy</li><li>Very low offset drift over temperature</li><li>No insertion losses</li><li>Standards:IEC 60664-1: 2020, IEC 61800-5-1: 2022, IEC 62109-1: 2010</li></ul> more... |
||||||||||
| CR2A 400 H00 | 400 | ±600 | ±15...24 | ±100mA | ±0.5 | 100 | -40~85 | Ø35.0 | ||
 CR2A 400 H00<ul><li>Closed loop（compensated）current sensor using the Hall Effect</li><li>Galvanic separation between primary and secondary</li><li>Insulating plastic case recognized according to UL 94-V0</li><li>Very good linearity</li><li>High accuracy</li><li>Very low offset drift over temperature</li><li>No insertion loss</li><li>Standards:EN50178: 1997, IEC 61010-1: 2000, UL 508: 2010</li></ul> more... |
||||||||||
| CR2A 500 H00 | 500 | ±800 | ±15...24 | ±100mA | ±0.5 | 100 | -40~85 | Ø35.0 | ||
 CR2A 500 H00<ul><li>Closed loop（compensated）current sensor using the Hall Effect</li><li>Galvanic separation between primary and secondary</li><li>Insulating plastic case recognized according to UL 94-V0</li><li>Very good linearity</li><li>High accuracy</li><li>Very low offset drift over temperature</li><li>No insertion loss</li><li>Standards:EN50178: 1997, IEC 61010-1: 2000, UL 508: 2010</li></ul> more... |
||||||||||
| CM3A 500 H00 | 500 | ±800 | ±15...24 | ±100mA | ±0.5 | 100 | -40~85 | Ø30.2 | ||
 CM3A 500 H00<ul><li>Closed loop (compensated) current sensor using the Hall Effect</li><li>Galvanic separation between primary and secondary</li><li>Insulating plastic case recognized according to UL 94-V0</li><li>Very good linearity</li><li>High accuracy</li><li>Very low offset drift over temperature</li><li>No insertion loss</li><li>Standards:IEC 60664-1:2020, IEC 61800-5-1:2022, IEC 62109-1:2010</li></ul> more... |
||||||||||
| CM3A 500 H01 | 500 | ±800 | ±15...24 | ±100mA | ±0.5 | 100 | -40~85 | Ø30.2 | ||
 CM3A 500 H01<ul><li>Closed loop (compensated) current sensor using the Hall Effect</li><li>Galvanic separation between primary and secondary</li><li>Insulating plastic case recognized according to UL 94-V0</li><li>Very good linearity</li><li>High accuracy</li><li>Very low offset drift over temperature</li><li>No insertion loss</li><li>Standards:IEC 60664-1:2020, IEC 61800-5-1:2022, IEC 62109-1:2010</li></ul> more... |
||||||||||
| CM4A 1000 H00 | 1000 | ±2100 | ±15...24 | ±200mA | ±0.3 | 150 | -40~85 | Ø38 | ||
 CM4A 1000 H00<ul><li>Closed loop（compensated）current sensor using the Hall Effect</li><li>Galvanic separation between primary and secondary</li><li>Insulating plastic case recognized according to UL 94-V0</li><li>Very good linearity</li><li>High accuracy</li><li>Very low offset drift over temperature</li><li>No insertion loss</li><li>Standards:EN50178: 1997, IEC 61010-1: 2000, UL 508: 2010</li></ul> more... |
||||||||||
| CM4A 1000 H03 | 1000 | ±1800 | ±24 | ±300mA | ±0.4 | 150 | -40~85 | Ø38 | ||
 CM4A 1000 H03<ul><li>Closed loop（compensated）current sensor using the Hall Effect</li><li>Galvanic separation between primary and secondary</li><li>Insulating plastic case recognized according to UL 94-V0</li><li>Very good linearity</li><li>High accuracy</li><li>Very low offset drift over temperature</li><li>No insertion loss</li><li>Standards:EN50178: 1997, IEC 61010-1: 2000, UL 508: 2010</li></ul> more... |
||||||||||
| CM4A 1000 H05 | 1000 | ±2100 | ±15...24 | ±200mA | ±0.3 | 150 | -40~85 | Ø38 | ||
 CM4A 1000 H05<ul><li>Closed loop（compensated）current sensor using the Hall Effect</li><li>Galvanic separation between primary and secondary</li><li>Insulating plastic case recognized according to UL 94-V0</li><li>Very good linearity</li><li>High accuracy</li><li>Very low offset drift over temperature</li><li>No insertion loss</li><li>Standards:EN50178: 1997, IEC 61010-1: 2000, UL 508: 2010</li></ul> more... |
||||||||||
| CM5A 2000 H20 | 2000 | ±4250 | ±15...24 | ±400mA | ±0.3 | 150 | -40~85 | Ø57.5 | ||
 CM5A 2000 H20<ul><li>Closed loop (compensated) current sensor using the Hall Effect</li><li>Galvanic separation between primary and secondary</li><li>Insulating plastic case recognized according to UL 94-V0</li><li>Very good linearity</li><li>High accuracy</li><li>Very low offset drift over temperature</li><li>No insertion loss</li><li>Standards:IEC 60664-1:2020, IEC 61800-5-1:2022, IEC 62109-1:2010</li></ul> more... |
||||||||||
| HR1M 100 H00 | 100 | ±600 | 20...50 | 4...20mA | ±1 | 20~6000 | -40~85 | Ø35.0 | ||
 HR1M 100 H00<ul><li>True rms output 4-20mA</li><li>Primary hole:Φ35mm</li><li>Galvanic separation between primary and secondary</li><li>Insulating plastic case recognized according to UL 94-V0</li><li>Very low offset drift over temperature</li><li>No insertion loss</li><li>Standards:IEC 61010-1: 2000,UL 508: 2010</li></ul> more... |
||||||||||
| HR1M 200 H00 | 200 | ±600 | 20...50 | 4...20mA | ±1 | 20~6000 | -40~85 | Ø35.0 | ||
 HR1M 200 H00<ul><li>HR1M</li><li>True rms output 4-20mA</li><li>Primary hole:Φ35mm</li><li>Galvanic separation between primary and secondary</li><li>Insulating plastic case recognized according to UL 94-V0</li><li>Very low offset drift over temperature</li><li>No insertion loss</li><li>Standards:IEC 61010-1: 2000,UL 508: 2010</li></ul> more... |
||||||||||
| HR1M 300 H00 | 300 | ±1000 | 20...50 | 4...20mA | +1 | 20~6000 | -40~85 | Ø35.0 | ||
 HR1M 300 H00<ul><li>True rms output 4-20mA</li><li>Primary hole:Φ35mm</li><li>Galvanic separation between primary and secondary</li><li>Insulating plastic case recognized according to UL 94-V0</li><li>Very low offset drift over temperature</li><li>No insertion loss</li><li>Standards:IEC 61010-1: 2000,UL 508: 2010</li></ul> more... |
||||||||||
| HR1M 400 H00 | 400 | ±1000 | 20...50 | 4...20mA | +1 | 20~6000 | -40~85 | Ø35.0 | ||
 HR1M 400 H00<ul><li>True rms output 4-20mA</li><li>Primary hole:Φ35mm</li><li>Galvanic separation between primary and secondary</li><li>Insulating plastic case recognized according to UL 94-V0</li><li>Very low offset drift over temperature</li><li>No insertion loss</li><li>Standards:</li><li>IEC 61010-1: 2000</li><li>UL 508: 2010</li></ul> more... |
||||||||||
| HR1M 500 H00 | 500 | ±1800 | 20...50 | 4...20mA | +1 | 20~6000 | -40~85 | Ø35.0 | ||
 HR1M 500 H00<ul><li>True rms output 4-20mA</li><li>Primary hole:Φ35mm</li><li>Galvanic separation between primary and secondary</li><li>Insulating plastic case recognized according to UL 94-V0</li><li>Very low offset drift over temperature</li><li>No insertion loss</li><li>Standards:</li><li>IEC 61010-1: 2000</li><li>UL 508: 2010</li></ul> more... |
||||||||||